Jul 212012

Case study: Customer wants to:

 Plug in a 2.4 NanoStation2 configured as a multi-client AP (for pay customers) into the 2nd ethernet port of a NanoStationM5 configured as a bridge.

 The 2nd ethernet port of the NanoStationM5 provides POE to the NanoStation2


  • Connect the NanoStation M5 secondary port, to your internet modem/router (note that the NanoStationM5 has 2 ethernet
    ports, it has to be through the secondary port) .

  • Afterwards, set it up as an access point (Channel 20mhz).  Through the main port you have to plug in theNanoStation
     (with no need for a PoE).  In this way, you will be able to send a signal in both frequencies 5GHz and 2.4GHz at the same time.

 Leave a Reply

Copyright © 2004 - 2022 Data Alliance lnc. All Rights Reserved